000			02228nab a2200313 i 4500
001			1280
003			OSt
005			20250502130853.0
008			250306b un ||||f |||| 00| | eng d
040			_cЦНТУ
041			_aeng
245			_aKinematics of cutting process while honing holes with a hone with variable geometry of sticks _h[Текст] _c / K. Shcherbyna, A. Hrechka, V. Mazhara, T. Diachenko
250			_aКонструювання, виробництво та експлуатація сільськогосподарських машин _bВип. № 50
260			_aКропивницький : _bЦНТУ, _c2020.
300			_aС. 159-164.
500			_aThe article considers the process of kinematics in the formation of the grid of traces taking into account the influence on microrelief of the formed surface. Schemes of interaction of the machined surface with diamond-abrasive sticks, which are positioned at different angles and their influence on the formation of the microrelief of the machined holes have been given. The calculation scheme of positioning diamond-abrasive sticks at different angles is presented. On this basis, mathematical models of density of the formed grid of traces were obtained. The study of the influence of the inclination angle of diamond-abrasive sticks on the formation of the macrorelief of the machined hole is also presented. The influence of transfer of peculiar geometrical deviations of honing heads on the machined surface is defined.
653			_amicrorelief
653			_amacrorelief
653			_agrid of traces
653			_ahoning head
700			_aShcherbyna, K.
700			_aHrechka, A.
700			_aMazhara, V.
700			_aDiachenko, T.
773	0		_dКропивницький ЦНТУ 2020 _x2414-3820 _w1255 _tКонструювання, виробництво та експлуатація сільськогосподарських машин. Вип. 50
856			_uhttps://dspace.kntu.kr.ua/handle/123456789/10996 _yРепозитарій Центральноукраїнського національного технічного університету
942			_2udc _cIR _n0
999			_c1280 _d1280